Silo flow problems: ratholing, bridging and blockage
When a silo will not empty, the cause is usually the cone angle and outlet design rather than the material.

Flow problems in powder and granule silos fall into four groups.

- Ratholing: material flows only through a narrow channel above the outlet while the rest stays stagnant.
- Build-up: material sticking to the walls reduces capacity over time and can degrade.
- Bridging: material forms an arch above the outlet and stops the flow.
- Blockage: moisture or compaction locks the outlet zone.
The fix starts with design
A cone angle and outlet size chosen for the material's flow properties prevent most of these problems. In existing silos, a silo activator, air pads or air hammers restore the flow.



