LOSS-IN-WEIGHT FEEDING
Weight-controlled feeding every second on the loss-in-weight principle
In loss-in-weight feeding, the feeder stands on load cells together with its hopper and screw. During feeding the decrease in total weight is measured continuously; the decrease per unit of time gives the actual throughput, and the controller corrects the screw speed to the set point.
At OPTA Mühendislik we select single- and twin-screw, vibratory or liquid loss-in-weight feeders according to your material and throughput, and commission them together with refill systems and automation.

Operating principle
- STEP 01
Weighing
The hopper and screw are weighed continuously on load cells.
- STEP 02
Throughput calculation
The rate of weight loss gives the actual throughput.
- STEP 03
Correction
The controller corrects the screw speed to the set point.
- STEP 04
Filling
When the hopper runs low it is quickly refilled.
Gravimetric vs volumetric feeding
| Loss-in-weight (gravimetric) | Volumetric | |
|---|---|---|
| Measured value | Weight (kg/h) | Volume (screw speed) |
| Accuracy | High, unaffected by material changes | Depends on bulk density |
| Calibration | Self-correcting | Needed again when the material changes |
| Investment | Higher | Low |
Equipment and standards
Standard
- Load-cell feeder
- Single or twin screw
- Controller
- Refill valve / receiver
Optional
- Hopper agitator
- Stainless contact surfaces
- Profibus / Profinet communication
- Draught and vibration protection
Standards
- ATEX 2014/34/EU
- Machinery Directive 2006/42/EC
More in Continuous dosing
Continuous dosing systemsMulti-feeder, ratio-controlled continuous lines.→All continuous dosingWeighing and Dosing→Frequently asked questions
Is it suitable for very low throughputs?
Yes. With small screw diameters, throughputs starting from a few hundred grams per hour can be dosed.
Does vibration in the area affect measurement?
It does; we place the feeder on a vibration-isolated platform and use filtering in the controller.
Can liquids be dosed by loss-in-weight?
Yes. With a weighed tank and dosing pump, liquids can also be fed under weight control.
Let’s work together on loss-in-weight feeding
Tell us about your raw material, capacity and site, and we will come back with a preliminary design and quotation.