Get a Quote

SCREW CONVEYOR

Dust-free mechanical conveying with tube and U-trough screw conveyors

A screw conveyor carries powder and granular material with a helical screw rotating inside a casing. Its enclosed body means no dust escapes; capacity is easily adjusted by speed, and it can also act as a feeder for dosing.

At OPTA Mühendislik we manufacture tube and U-trough screws — horizontal, inclined and vertical — in carbon steel or stainless steel. We calculate screw diameter, pitch, shaft and speed for your material and required capacity.

Ø 100 – 400screw diameter (mm)
up to 12 msingle piece
Tube / U-troughbody
Screw Conveyor

Screw capacity calculator

Enter the screw diameter, shaft diameter, pitch and speed to see the theoretical conveying capacity.

Screw

Raw material

Conveying capacity–
Volumetric flow
Material travel speed
Incline factor
Filled cross-section

Request a quote with these values

Theoretical capacity: Q = 60 · π/4 · (D² − d²) · S · n · φ · k. Actual capacity may vary by ±20% depending on the material's flow behaviour.

Tube vs U-trough screw

Tube typeU-trough type
BodyEnclosed tubeU-trough with cover
Inclined conveyingVery suitableLimited
Maintenance / cleaningThrough the end coversEasy by opening the top cover
Intermediate inlet / outletLimitedMultiple points easily
Typical useUnder silos, inclined feedingLong horizontal runs, multiple outlets

From the field

Screw feeding line on a platform
Screw feeding line on a platform
Inclined screw with hopper
Inclined screw with hopper
Screw conveyor
Screw conveyor

Equipment and standards

Standard

  • Carbon steel or stainless body
  • Geared motor / drive
  • Maintenance and inspection covers
  • Mounting flanges

Optional

  • Stainless construction
  • Frequency inverter
  • Wear-resistant flight
  • Intermediate bearings
  • Rotation / blockage sensor

Standards

  • Machinery Directive 2006/42/EC
  • ATEX 2014/34/EU
  • Food-grade materials (option)

More in Conveyors

Belt conveyorFlat, inclined and sidewall belt conveyors.→All conveyorsEquipment / Machines→

Frequently asked questions

Screw or pneumatic conveying?

A screw is economical over a short distance to a single destination; pneumatic conveying is better for long distances, multiple destinations and height differences.

What about sticky materials?

Sticky materials can be conveyed with a shaftless screw or a special flight profile.

Can a screw dose?

Yes. With speed control it acts as a volumetric feeder, and together with a weigh hopper it is used for precise dosing.

Let’s work together on screw

Tell us about your raw material, capacity and site, and we will come back with a preliminary design and quotation.