SILO BLENDER
Homogenise large granule batches inside the silo
A silo blender homogenises large-volume granule batches inside the silo. An inner cone fitted in the conical section of the silo stops material flowing only through the centre; granules in different layers of the silo move down at the same time and mix at the outlet. Material taken from the outlet is sent back to the top of the silo through a pneumatic line and the cycle repeats.
At OPTA Mühendislik we design silo blenders for polymer production, compounding and recycling plants to even out lot differences and ship product of consistent quality.


How does it work?
In a normal silo, a channel opens through the centre as the material discharges; first the material at the top comes out, then the material at the sides, and batches flow out in turn without mixing. The inner cone in a silo blender blocks this channel so the whole cross-section of the silo moves down together.
Material at the outlet is carried back to the top of the silo by the pneumatic recirculation line and refilled. When this cycle repeats a few times, the different lots in the silo turn into a homogeneous blend. The blend and level can be watched through sight glasses.
- Granules are filled into the silo
- The inner cone makes the whole cross-section move down together
- Material at the outlet returns to the top through the pneumatic line
- The cycle repeats until the batch is homogeneous
- The homogeneous batch is shipped
Equipment
Standard
- Stainless silo body
- Inner cone
- Pneumatic recirculation line
- Sight glasses
- Level sensors
Optional
- Sampling point
- Weighing
- Inert gas connection
Standards
- ATEX 2014/34/EU
- EN 1090
More in Granule mixers
Vertical granule mixerOPTA granule mixer with central vertical screw.→
Vacuum granule mixerGranule mixer filled automatically by a vacuum receiver.→All granule mixersMixing→Frequently asked questions
Which materials is a silo blender suitable for?
It suits free-flowing granules and coarse products; for cohesive powders we recommend other solutions.
How many cycles until it is homogeneous?
Depending on the material and lot differences, one or two cycles are usually enough.
Can a blender be added to an existing silo?
Depending on the silo diameter and cone, the inner cone and recirculation line can be retrofitted.
Let’s work together on silo blender
Tell us about your raw material, capacity and site, and we will come back with a preliminary design and quotation.