Get a Quote

PROCESS HOPPERS

Stainless feed hoppers for extruders, mixers and dosing machines

A process hopper is a feed vessel positioned directly above the production machine, supplying a few hours' or one batch's worth of material. It collects material from a vacuum receiver, screw or big bag station and transfers it in a controlled way to the feeder, weighing unit or extruder throat.

At OPTA Mühendislik we manufacture process hoppers from AISI 304 / 316L stainless steel with a cone angle and outlet diameter that will not disturb material flow. With options such as level sensors, sight glasses, slide gate valves, vibrators and load cells, we adapt them to your machine and process.

50 L – 3 m³volume
304 / 316Lstainless
Ra ≤ 0.8 µmhygienic surface (opt.)
Process hoppers

Hopper types

Extruder feed hopper
01 / 03

Extruder feed hopper

Filled by a vacuum receiver or screw, it feeds the extruder throat or a gravimetric feeder. Filling is automatic via a level sensor.

When is it preferred?

Machine-side feeding on PVC, PE, PP and compound lines.

Vacuum receiverLevel sensorSlide gate valve
Weigh hopper
02 / 03

Weigh hopper

A hopper suspended from or resting on load cells. Several raw materials are weighed in sequence to prepare a recipe and discharged in batches into a mixer or reactor.

When is it preferred?

Applications requiring batch dosing, recipe preparation and consumption tracking.

Load cellWeighing indicatorButterfly valve
Pre-mixer / post-mixer hopper
03 / 03

Pre-mixer / post-mixer hopper

A hopper above the mixer that prepares the next batch, or below it that collects the mixed product. It shortens the mixer cycle time and balances the line.

When is it preferred?

Dryblend, powder coating and construction chemical mixing lines.

Sight glassVibratorVenting filter

Equipment and standards

Standard

  • AISI 304 stainless body
  • Cone angle suited to flow
  • Hinged inspection door
  • Level sensor connection
  • Slide gate valve at the outlet

Optional

  • 316L and internal polishing
  • Load cell weighing
  • Vibrator / agitator
  • Sight glass
  • Heating jacket

Standards

  • ATEX zoning
  • Food-contact compliance (option)
  • Machinery Directive 2006/42/EC

More in Intermediate silos and hoppers

Day silosBuffer stock for one shift's or one day's consumption.→All intermediate silos and hoppersRaw Material Storage→

Frequently asked questions

How do you choose the hopper volume?

We size it to leave at least 15–30 minutes of stock, based on the machine's hourly consumption and the filling system's cycle time.

Do hoppers clog with sticky powders?

We secure flow with a steep cone, polished inner surface and a vibrator or agitated outlet.

Can you build the hopper to fit my existing machine's flange?

Yes. We measure your machine's inlet flange and height limit and manufacture the hopper accordingly.

Let’s work together on process hoppers

Tell us about your raw material, capacity and site, and we will come back with a preliminary design and quotation.