CONICAL MIXERS
Mix delicate and fragile powders gently and empty completely
A conical mixer mixes by lifting material from the bottom with a screw rotating inside a vertical conical body and letting it fall back by gravity. While rotating on its own axis, the screw also travels along the body wall and sweeps the whole volume. The shear force applied to the material is very low.
At OPTA Mühendislik we recommend conical mixers for mixing fragile, heat-sensitive powders and powders of different densities. Thanks to the conical shape the mixer empties completely from the bottom, minimising residue and cross-contamination at product changes.

Advantages
Gentle mixing
Fragile and coated particles are not damaged.
Complete discharge
Residue-free discharge from the conical bottom.
Low energy
Slowly rotating screw, low motor power.
Flexible fill level
Mixes even at low fill levels.
Closed system
Can operate under vacuum or inert gas.
Heating / cooling
Drying and cooling with a jacketed body.
Equipment and standards
Standard
- AISI 304 contact surfaces
- Geared motor
- Pneumatic discharge flap
- Covers with safety switches
- Control panel
Optional
- 316L and polished inner surface
- Load cell weighing
- Liquid spray nozzles
- Heating / cooling jacket
- Frequency inverter
Standards
- Machinery Directive 2006/42/EC
- ATEX 2014/34/EU
- Food-grade materials (option)
More in Powder mixers
Ribbon mixersFast, homogeneous powder blending with a horizontal ribbon agitator.→
Dryblend preparationFeeding, dosing and mixer line for PVC dryblend.→All powder mixersMixing→Frequently asked questions
Is a conical mixer slower than a ribbon mixer?
Mixing time is usually longer, but it does not harm the material and gives complete discharge.
Which sectors use it?
It is used for pharmaceutical, food, chemical, pigment and sensitive additive blends.
Can it operate under vacuum?
Yes. With a pressure-rated body, vacuum drying or mixing under inert gas is possible.
Let’s work together on conical mixers
Tell us about your raw material, capacity and site, and we will come back with a preliminary design and quotation.