Get a Quote

SILO

Industrial silo design and manufacture for powder and granular raw materials

An industrial silo is the main piece of equipment in which powder and granular raw material is stored safely, cleanly and continuously on site. A well-designed silo does more than hold material: it captures dust during filling, prevents the material from degrading in storage and feeds the process at a steady rate during discharge. At OPTA Mühendislik we calculate silos from your material's bulk density, moisture, particle size and flow behaviour, and manufacture them in our workshop in Dilovası, Kocaeli.

Alongside our standard skirted silo series from 30 m³ to 150 m³, with stainless steel (AISI 304 / 316L), aluminium (1050) and carbon steel (ST37) bodies, we build leg-supported or skirted silos tailored to your site and capacity. By setting the cone angle and outlet diameter for mass flow, we prevent flow problems such as bridging, rat-holing, build-up and blockages at the design stage.

We install equipment such as silo top filters, level sensors, pressure relief valves, explosion vents, silo activators and rotary valves turnkey, together with the tanker or pneumatic filling line and PLC / SCADA automation. We deliver ATEX-zoned silo projects in the plastics, cable, chemical, construction chemical, mining, glass and food sectors.

30 – 150 m³standard series
304 · 1050 · ST37body material
ATEXzoning
Stainless steel silo with caged ladder

Standard silo dimensions

Dimensions of our skirted silo series. Click a model to see its dimensioned drawing, and send it to the calculator if you want to modify it.

All models are built in: AISI 304 Stainless1050 AluminiumST37 Carbon steel

Skirted silo series dimension table
ModelVolume (m³)Diameter ØD (mm)Cylindrical shell H (mm)Total weight* (kg)Select
S30.CS302.4006.0002.181,7Select
S40.CS402.4008.0002.774,7Select
S50.CS502.7008.0003.456,5Select
S60.CS602.9509.0004.128,6Select
S70.CS703.1808.0004.198,5Select
S80.CS803.1808.5004.387,4Select
S90.CS903.18010.5005.483,3Select
S100.CS1003.18012.0006.087,5Select
S110.CS1103.28012.0006.482,0Select
S120.CS1203.45012.0007.085,8Select
S130.CS1303.58012.0007.402,0Select
S140.CS1403.70012.0007.699,0Select
S150.CS1503.82012.0007.984,0Select

* Total silo mass including skirt and roof. For project-specific dimensions use the calculator or contact us.

Silo volume calculator

Enter the diameter, shell height, cone angle and outlet diameter to instantly see the silo's geometric volume, usable volume and capacity.

Dimensions

Raw material

Total geometric volume–
Cylinder volume
Cone volume
Usable volume
Capacity
Cone height
Total height

Request a quote with these dimensions

This is the geometric volume; the roof cone and angle of repose are not included. Final dimensions are determined by flow analysis.

How does material flow in a silo?

Choose a flow type or a common flow problem to see its cause and how we prevent it in the design.

Flow types
Flow problems

A silo project in 5 steps

  1. ADIM 01

    Material analysis

    Bulk density, moisture, particle size and flow behaviour

  2. ADIM 02

    Flow and sizing calculation

    Volume, diameter, cone angle and outlet diameter

  3. ADIM 03

    Material and equipment

    Body material, filter, sensors, discharge

  4. ADIM 04

    Manufacturing

    Welded fabrication and testing in our 1,200 m² workshop

  5. ADIM 05

    Installation and commissioning

    On-site installation and automation by our own team

Equipment and standards

Standard

  • Cone based on flow analysis
  • Silo top filter
  • Min / max level sensor
  • Pressure relief valve
  • Caged ladder, roof railing

Optional

  • Load cell weighing
  • Silo activator, aeration pad
  • Explosion vent
  • Thermal insulation, internal lining
  • Walkway between silos

Standards

  • ATEX 2014/34/EU zoning
  • PED (for pressurised designs)
  • EN 1090 steel fabrication
  • Seismic and wind load calculation

Prepare for your project

OPTA product cataloguePDFDownloadSilo data formRequest it and we will prepare a preliminary designRequest

Frequently asked questions

How do you determine silo size?

We calculate the required volume from daily consumption, tanker or big bag delivery frequency and the material's bulk density, and the diameter, cone angle and outlet diameter from its flow properties.

Do you build silos other than the standard models?

Yes. The skirted series in the table covers the most common sizes; we also design project-specific silos to suit site height, material and capacity.

What materials do you build silos from?

AISI 304 / 316L stainless steel, 1050 aluminium and ST37 carbon steel. The choice depends on the material, hygiene requirements and budget.

Is ATEX required for outdoor silos?

We carry out zoning for every silo where an explosive dust atmosphere may form, and protect it with an explosion vent and pressure relief valve.

Do you carry out installation and commissioning?

Yes. Manufacturing takes place in our Dilovası workshop; installation, automation and commissioning are done by our own team.

Let’s look at your material's flow together

Tell us about your raw material, consumption and site, and we will come back with a preliminary design and quotation.