Get a Quote

MULTI-POINT DISTRIBUTION

Feed many silos and machines automatically with a single conveying line

Multi-point distribution is a system in which several destinations are fed by the same pneumatic line. Each destination's level sensor reports to the PLC; when a destination runs low, the relevant valve switches position and conveying is directed to it. There is no need to build a separate line and conveying unit for every destination.

At OPTA Mühendislik we build distribution systems with diverter valves connected in series or single-body multi-outlet distributors. Priority order, prevention of cross-contamination and line purging are defined in the automation.

Series / distributortwo methods
Prioritisedfeeding order
Single linelow investment
Multi-point distribution

Distribution methods

Diverter valves in seriesMulti-outlet distributor
ConstructionTwo-way valves one after another along the lineRotary distributor in a single body
Number of destinationsFlexible, can be added laterFixed by the body (4 – 12)
LayoutDestinations spread along the lineDestinations branch from the same point
Pressure dropIncreases with the number of valvesLow, single pass
Distribution by automation

Distribution by automation

Each destination's minimum and maximum level sensors are connected to the PLC. The PLC queues the destinations running low by priority, positions the valves and starts conveying.

  • Valve position feedback
  • Interlock against conveying to the wrong destination
  • Line purge cycle
  • Monitoring from SCADA

Equipment and standards

Standard

  • Diverter valves
  • Position sensors
  • Level sensors
  • PLC distribution software

Optional

  • Multi-outlet distributor
  • Wear-resistant valve body
  • SCADA screen
  • Line purge valves

Standards

  • ATEX 2014/34/EU
  • Machinery Directive 2006/42/EC

More in Distribution

Diverter valvesValves that divert one line to several destinations.→All distributionPneumatic Conveying→

Frequently asked questions

How many destinations can be connected to one line?

It depends on pressure drop and cycle time; in practice 10–12 destinations is common.

Can different materials be distributed through the same line?

Yes, but a line purge cycle and a material changeover procedure are defined to avoid cross-contamination.

Can a new destination be added to an existing line?

With series valve systems usually yes; a new valve and level sensor are added and the software is updated.

Let’s work together on multi-point distribution

Tell us about your raw material, capacity and site, and we will come back with a preliminary design and quotation.