DIVERTER VALVES
Diverting one conveying line to several silos or machines
Diverter valves direct material in a pneumatic or gravity line to two or more destinations. They change position with a pneumatic actuator; position sensors tell the automation system which way the valve is set.
At OPTA Mühendislik we select diverter valves according to line pressure, material abrasiveness and sealing requirements, and install them with automation in multi-point distribution systems.

Valve types
Flap diverter
In gravity lines, at low pressure.
Tube (plug) type
In pneumatic lines, leak-tight passage.
Ball diverter
In high-pressure dense phase lines.
Multi-outlet distributor
From a single body to multiple destinations.
From the field



Equipment and standards
Standard
- Carbon steel or stainless body
- Geared motor / drive
- Maintenance and inspection covers
- Mounting flanges
Optional
- Position sensors
- Wear-resistant inner surface
- Manual operation
- Stainless body
Standards
- Machinery Directive 2006/42/EC
- ATEX 2014/34/EU
- Food-grade materials (option)
More in Process equipment
Rotary valvesMetered feeding into the line without pressure loss.→
Lump breakerBreaks up lumps to regulate flow and dosing.→
Metal separatorProtects product and machines from metal pieces.→All process equipmentEquipment / Machines→Frequently asked questions
Which valve type should be chosen?
It is chosen according to line pressure, material and sealing requirement; leak-tight types are used on dense phase lines.
How is the valve position verified?
Inductive position sensors report the valve position to the PLC; conveying does not start if the position is wrong.
Can a valve be added to an existing line?
Yes. A new destination can be added with a valve to suit the line diameter.
Let’s work together on diverter valves
Tell us about your raw material, capacity and site, and we will come back with a preliminary design and quotation.