GRAVIMETRIC FEEDERS
Precision feeders that measure and correct throughput by weight
A gravimetric feeder continuously measures the weight of the material it feeds and controls throughput in kilograms per hour. Even if the material's bulk density changes, the feeder automatically corrects its speed to hold the set point.
At OPTA Mühendislik we manufacture gravimetric feeders to our own design, selecting screw diameter, hopper volume and load cell according to throughput. They are used on their own or in multiples on continuous dosing lines.

Features
Real-time control
Throughput is measured from weight and corrected continuously.
Material-independent
Unaffected by changes in bulk density.
Easy cleaning
Quick-release screw and hopper.
Communication
Connects to line control via Profinet / Modbus.

Gravimetric feeding of liquids
Gravimetric feeding is not limited to powders and granules. Liquid additives are pumped from tanks mounted on load cells; the decrease in tank weight gives the instantaneous throughput and the pump speed is adjusted accordingly.
When the tank empties, feeding continues volumetrically for a short time while the tank is refilled from the storage tank; weight control then resumes where it left off. Liquid additives are thus dosed with the same accuracy and under the same recipe as the powder components.
- Load-cell weighing tank
- Frequency-controlled dosing pump
- Automatic refill from storage tank
- Common control for powders and liquids
From the field



Equipment and standards
Standard
- Load-cell frame
- Screw and geared motor
- Hopper
- Controller
Optional
- Twin screw
- Hopper agitator
- Automatic refill (vacuum receiver)
- Stainless construction
Standards
- ATEX 2014/34/EU
- Machinery Directive 2006/42/EC
More in Feeders
Volumetric feedersSpeed-controlled, economical screw feeders.→All feedersWeighing and Dosing→Frequently asked questions
What throughputs are gravimetric feeders used for?
From a few hundred grams to several tonnes per hour, depending on screw diameter.
Single screw or twin screw?
A single screw is preferred for free-flowing granules and powders; a twin screw for sticky, bridging or erratically flowing powders.
Can my existing volumetric feeder be converted to gravimetric?
In some cases it can be converted by adding a load-cell frame and controller; we inspect the feeder and make a recommendation.
Let’s work together on gravimetric feeders
Tell us about your raw material, capacity and site, and we will come back with a preliminary design and quotation.