VOLUMETRIC FEEDERS
Economical, robust feeders controlled by screw speed
A volumetric feeder is dosing equipment that feeds material at a constant volume depending on screw speed. It is a simple, economical and reliable solution for materials with constant bulk density, and is also used for coarse / fine feeding into weigh hoppers in gravimetric systems.
At OPTA Mühendislik we manufacture single- or twin-screw volumetric feeders with agitated hoppers and frequency control.

When is it preferred?
If the material's bulk density is constant and the accuracy requirement is moderate, a volumetric feeder is enough. In systems feeding a weigh hopper, the weighing provides the real accuracy; the feeder works with coarse and fine feed speeds.
- Granules with constant density
- Feeding weigh hoppers
- Low-budget dosing applications
- Masterbatch and additive proportioning
Equipment and standards
Standard
- Screw, body and geared motor
- Hopper
- Frequency inverter
- Calibration outlet
Optional
- Twin screw
- Hopper agitator
- Stainless construction
- Level sensor
Standards
- Machinery Directive 2006/42/EC
- ATEX (in dusty environments)
More in Feeders
Gravimetric feedersWeight-controlled, high-accuracy feeders.→All feedersWeighing and Dosing→Frequently asked questions
How do I calibrate a volumetric feeder?
The material delivered at a given speed over a given time is weighed and the speed–throughput relationship is entered into the controller.
How accurate is it?
Typically ±2–5% depending on the material; for higher accuracy we recommend a gravimetric feeder.
Which materials cause problems?
Powders with varying bulk density, bridging or erratic flow need an agitated hopper.
Let’s work together on volumetric feeders
Tell us about your raw material, capacity and site, and we will come back with a preliminary design and quotation.