Get a Quote

LIQUID STORAGE TANKS

Stainless steel storage tanks for plasticisers, resins, oils and chemicals

A liquid storage tank is the stainless steel vessel in which liquid raw material delivered by tanker or IBC is stored safely on site and pumped to the process. A well-designed tank prevents contamination, moisture pick-up and sediment, and reports level and temperature to the automation system.

At OPTA Mühendislik we manufacture vertical and horizontal storage tanks from AISI 304 / 316L stainless steel with torispherical (Klöpper), conical or flat bottoms. We calculate tank volume from your tanker deliveries and consumption, and install the tank turnkey with pump, filter, piping, level sensor and weighing system.

We deliver storage tanks for plasticisers (DOTP, DINP) in the plastics and cable sectors, resins and styrene in composites, and LABSA, SLES and oils in chemicals and detergents.

1 – 100 m³volume
Klöpper · conical · flatbottom types
Level + weighingmeasurement
Liquid storage tanks

Tank volume calculator

Enter the diameter, shell height and bottom type to see the tank's total and working volume, liquid mass and overall height.

Body

Liquid

Total geometric volume–
Cylinder volume
Bottom volume
Working volume
Liquid mass
Total vessel height
Top head volume

Request a quote with these values

For a Klöpper bottom the approximations V ≈ 0.0809 · D³ and h ≈ 0.1935 · D are used; the straight flange is not included.

Tank types

Vertical storage tank
01 / 03

Vertical storage tank

The most common tank type. It gives high volume on a small footprint and can be fully drained with a Klöpper or conical bottom.

When is it preferred?

Continuously consumed liquid raw materials delivered by tanker.

Level sensorBreather filterManhole
Leg-supported / weighed tank
02 / 03

Leg-supported / weighed tank

Tanks with load cells under their legs track stock and dosing by weight. In recipe-based production they allow the liquid component to be dosed directly from the tank.

When is it preferred?

Recipe-based production, consumption tracking and liquid dosing.

Load cellDosing pumpPneumatic valve
Indoor tank farm
03 / 03

Indoor tank farm

Tank groups in which several liquid raw materials are stored in the same hall with a common platform, bund and pump station.

When is it preferred?

Chemical, detergent and composite plants that use many liquid raw materials.

Common platformPump stationContainment bund

Equipment and standards

Standard

  • AISI 304 body, 316L option
  • Klöpper or conical bottom
  • Manhole and venting
  • Level indicator
  • Full drain valve

Optional

  • Radar / hydrostatic level measurement
  • Load cell weighing
  • Heating jacket and insulation
  • Agitator
  • Nitrogen blanketing

Standards

  • Design based on EN 14015 / API 650
  • PED (for pressurised tanks)
  • ATEX (for flammable liquids)

More in Liquid tanks

Heated and cooled tanksTemperature control with jacketed and coil-heated tanks.→All liquid tanksRaw Material Storage→

Frequently asked questions

What wall thickness do you build tanks with?

We calculate the shell thickness from the tank diameter, height, liquid density and design pressure, also taking seismic and wind loads into account.

Do you install tanker-to-tank unloading systems?

Yes. We install the tanker unloading point, transfer pump, filter and piping together with the tank.

Do you build tanks for flammable liquids?

Yes. We design flammable-liquid tanks with ATEX zoning, earthing, flame arresters and suitable equipment selection.

Let’s work together on liquid storage tanks

Tell us about your raw material, capacity and site, and we will come back with a preliminary design and quotation.