OPTAIR
A stepwise booster air system that prevents blockages in dense phase lines
OPTAIR is an OPTA-designed system of booster air stations placed at intervals along dense phase pneumatic conveying lines. Each station monitors the line pressure at its point; when a plug of material starts to compact, it injects a controlled amount of air only into that zone, splitting the plug and keeping it moving.
This lets the line run at low velocity without blocking and without increasing the main conveying air. OPTAIR increases conveying reliability on long lines with many bends and with cohesive or compaction-prone materials, while reducing air consumption and wear.


How does OPTAIR work?
Injection points placed every 3–6 metres along the line are fed from the main air line. Each station has a regulator, check valve and pressure measurement.
- The main air line runs parallel along the conveying line
- Stations continuously monitor line pressure
- Booster air is injected into the zone where pressure rises
- The plug is split and the material moves on at low velocity
- Stations close when the line is empty

OPTAIR on site
Booster air is supplied from the main air distribution line through flexible hoses to injection points on the conveying pipe. Each point has a regulator and check valve, so material cannot enter the air line.
- Injection points along the conveying pipe
- Flexible, pressure-resistant air hoses
- Easy-to-maintain, externally accessible connections
Why OPTAIR?
No blockages
Compacting plugs are cleared where they form.
Less air
Conveying continues without increasing the main air.
Less wear
Low velocity is maintained and bends last longer.
Easy retrofit
Can be added to existing dense phase lines.
Equipment and standards
Standard
- Injection points
- Regulator and check valve
- Main air distribution line
- Pressure gauge
Optional
- Electronic pressure sensor
- Solenoid-controlled station
- Pressure monitoring via PLC
- Stainless station
Standards
- Dry, oil-free air (ISO 8573-1)
- PED (air line)
More in Dense phase conveying
Dense phase conveying systemsComplete system with pressure vessel, booster air and line equipment.→
Weighed pressure vesselPressure vessel on load cells that weighs the conveyed quantity.→All dense phase conveyingPneumatic Conveying→Frequently asked questions
Can OPTAIR be added to my existing line?
Yes. We examine the line routing and your material, determine the injection point positions and air demand, and add it to the existing line.
For which materials is it needed?
It is important for cohesive and compaction-prone powders conveyed over long distances, and for lines with many bends.
Does it increase air consumption?
Because booster air is injected only where needed and in a controlled way, total air consumption usually goes down.
Let’s work together on OPTAIR booster air equipment
Tell us about your raw material, capacity and site, and we will come back with a preliminary design and quotation.