WEIGHED PRESSURE VESSEL
Weigh while you convey: OPTA pressure vessel on load cells
The pressure vessel is the heart of dense phase pneumatic conveying. Material fills the vessel, the vessel is closed and pressurised, and the material is pushed into the pipeline. A weighed pressure vessel sits on load cells and measures the material conveyed in each cycle by weight.
At OPTA Mühendislik we manufacture pressure vessels to our own design in compliance with the Pressure Equipment Directive (PED). With a weighed vessel, conveying and weighing are done in one piece of equipment; in recipe-based production no separate weigh hopper is needed and consumption is recorded.


Conveying and weighing in one unit
The vessel is isolated from the line and feed point by flexible connections and sits on load cells, so weighing is not affected during pressurising and conveying. The quantity filled into the vessel is measured each cycle, and feeding stops when the target quantity is reached.
- Net weight record for every cycle
- Conveying up to a target quantity (batch dispatch)
- No separate weigh hopper needed
- Consumption and stock tracking
OP-210 pressure vessel models
OPTA OP-210 series pressure vessels are built in standard volumes from 24 to 5,600 litres. Dimensions and shipping weights are listed below; you can download the data sheet or contact us for the model that suits your capacity.
| Model | Capacity [L] | A [mm] | B [mm] | Ø Diameter [mm] | Inlet valve DN | Shipping weight [kg] |
|---|---|---|---|---|---|---|
| OP0024 | 24 | 865 | 1.071 | 600 | 150 | 73 |
| OP0070 | 70 | 1.130 | 1.335 | 800 | 150 | 82 |
| OP0102 | 102 | 1.170 | 1.349 | 810 | 150 | 95 |
| OP0140 | 140 | 1.370 | 1.576 | 810 | 150 | 110 |
| OP0280 | 280 | 1.608 | 1.820 | 1.010 | 200 | 160 |
| OP0346 | 346 | 1.788 | 1.838 | 1.115 | 200 | 292 |
| OP0490 | 490 | 1.938 | 2.088 | 1.115 | 200 | 300 |
| OP0600 | 600 | 1.905 | 2.165 | 1.253 | 200 | 332 |
| OP0850 | 850 | 2.190 | 2.450 | 1.253 | 200 | 350 |
| OP1100 | 1.100 | 2.591 | 2.851 | 1.253 | 200 | 455 |
| OP1700 | 1.700 | 2.743 | 3.061 | 1.605 | 250 | 640 |
| OP2200 | 2.200 | 3.200 | 3.518 | 1.605 | 250 | 825 |
| OP2800 | 2.800 | 3.582 | 3.900 | 1.605 | 250 | 1.050 |
| OP4200 | 4.200 | 3.734 | 4.112 | 2.060 | 300 | 1.240 |
| OP5600 | 5.600 | 4.267 | 4.645 | 2.060 | 300 | 1.480 |
From the field



Equipment and standards
Standard
- Pressure vessel body (carbon steel / stainless)
- Inlet and outlet valves
- Flexible connections
- Load cells and indicator
- Safety valve and pressure gauge
Optional
- Fluidising bottom
- Level sensor
- Stainless inner surface
- OPTAIR line equipment
Standards
- PED 2014/68/EU
- EN 13445
- ATEX 2014/34/EU
More in Dense phase conveying
Dense phase conveying systemsComplete system with pressure vessel, booster air and line equipment.→
OPTAIR booster air equipmentStepwise booster air for dense phase lines; prevents blockages.→All dense phase conveyingPneumatic Conveying→Frequently asked questions
What is the weighing accuracy of a pressure vessel?
Depending on vessel volume and load cell selection, a typical accuracy of ±0.5–1% of the conveyed batch is achieved.
How do you determine the vessel volume?
We calculate it from hourly capacity, the cycle time that depends on line length, and the material's bulk density.
Are your pressure vessels certified?
We deliver our vessels with PED-compliant calculations, material certificates and a hydrostatic test.
Let’s work together on weighed pressure vessel
Tell us about your raw material, capacity and site, and we will come back with a preliminary design and quotation.