Get a Quote

SCREW FEEDING

Reliable, economical short-distance machine feeding with screw conveyors

Screw feeding is the method in which powder and granular material is carried by a rotating screw inside a tube or U-trough and fed to the machine hopper, mixer or silo inlet. It is economical over short and medium distances, easy to maintain, and its capacity is easily adjusted by speed.

At OPTA Mühendislik we manufacture horizontal, inclined and vertical screws as well as mobile screw feeders with hoppers. We calculate screw diameter, pitch, speed and fill ratio for your material and build them in stainless or carbon steel, as tube or U-trough types.

Ø 100 – 400screw diameter (mm)
0 – 45°incline
Mobiletypes with hopper
Screw feeding

Screw capacity calculator

Enter the screw diameter, shaft diameter, pitch and speed to see the screw's theoretical conveying capacity.

Screw

Raw material

Conveying capacity–
Volumetric flow
Material travel speed
Incline factor
Filled cross-section

Request a quote with these values

Theoretical capacity: Q = 60 · π/4 · (D² − d²) · S · n · φ · k. Actual capacity may vary by ±20% depending on the material's flow behaviour.

Screw feeder types

Mobile screw with hopper
01 / 03

Mobile screw with hopper

Consists of a hopper and an inclined screw on a wheeled chassis. Material loaded into the hopper from bags or big bags is moved around to feed different machines.

When is it preferred?

Small and medium plants feeding several machines in turn.

HopperInclined screwControl box
Inclined machine feed screw
02 / 03

Inclined machine feed screw

Carries material at an incline from the big bag station or hopper outlet to the machine hopper. It stops when the level sensor reports the machine hopper full.

When is it preferred?

Feeding extruders, mixers and packaging machines.

Level sensorFrequency inverter
Twin-screw dosing feeder
03 / 03

Twin-screw dosing feeder

Fills the weigh hopper quickly and precisely with two screws of different diameters for coarse and fine feeding.

When is it preferred?

Weighed recipe preparation and batch dosing.

Load cellCoarse / fine feeding

Equipment and standards

Standard

  • Tube or U-trough body
  • Geared motor
  • Inlet and outlet flanges
  • Cleaning covers

Optional

  • Stainless construction
  • Frequency inverter
  • Level sensor
  • Mobile chassis and hopper
  • Wear-resistant flight

Standards

  • Machinery Directive 2006/42/EC
  • ATEX (in dusty environments)

More in Raw material feeding lines

Vacuum feedingDust-free, automatic feeding above the machine with vacuum receivers.→Belt conveyor feedingBelt feeding for fragile and coarse materials.→All raw material feeding linesRaw Material Feeding→

Frequently asked questions

How far can a screw convey?

A single screw usually conveys up to 10–12 m; for longer distances, screws in series with an intermediate hopper or pneumatic conveying are recommended.

How does incline affect capacity?

Capacity drops as the incline increases because material slips back; at 30° you get roughly half the horizontal capacity.

Does it crush granules?

Crushing is minimised with the right pitch, low speed and fill ratio; vacuum conveying is recommended for very delicate granules.

Let’s work together on screw feeding

Tell us about your raw material, capacity and site, and we will come back with a preliminary design and quotation.