Get a Quote

SILO ACTIVATOR

Break bridges with a vibrating cone and discharge your silo trouble-free

A silo activator is a vibrating cone connected under the silo cone with a flexible sleeve. The deflector (inner cone) inside spreads the material pressure from the silo; vibration from the motor vibrator outside makes the material move across the whole cross-section. Bridging, rat-holing and build-up problems disappear.

At OPTA Mühendislik we size and manufacture silo activators according to silo diameter and material. They are part of the design in new silos and adapted to the cone outlet in existing ones.

Ø 1.200 – 3.000activator diameter (mm)
Motor vibratordrive
Retrofitfor existing silos
Silo activator
How does it work?

How does it work?

Because the activator is connected to the silo with a flexible sleeve rather than rigidly, vibration does not pass into the silo. The inner cone takes the material pressure over the outlet; vibration guides the material evenly to the outlet through the annular gap between the inner cone and the body.

  1. The activator is connected to the cone with a flexible sleeve
  2. The vibrator runs only during discharge
  3. The inner cone spreads the pressure
  4. Material moves to the outlet in mass flow

From the field

Silo activator on site
Silo activator on site
Silo activator design
Silo activator design
Silo cone and activator
Silo cone and activator

Equipment and standards

Standard

  • Carbon steel or stainless body
  • Geared motor / drive
  • Maintenance and inspection covers
  • Mounting flanges

Optional

  • Stainless construction
  • Twin vibrators
  • Wear plate
  • Outlet valve and flexible connection

Standards

  • Machinery Directive 2006/42/EC
  • ATEX 2014/34/EU
  • Food-grade materials (option)

More in Silo equipment

Silo top filterJet-pulse filters that remove dust from the filling air.→Silo fluidisersFluidisation with aeration pads and bottom sweep.→All silo equipmentEquipment / Machines→

Frequently asked questions

Does the activator damage the silo?

The flexible connection keeps the vibration in the activator; it is not transmitted to the silo body.

Does the vibrator run continuously?

It runs only during discharge; when discharge stops, the vibrator stops too.

Which materials is it used for?

Calcite, talc, PVC powder, pigments and other cohesive powders prone to bridging.

Let’s work together on silo activator

Tell us about your raw material, capacity and site, and we will come back with a preliminary design and quotation.