SILO FLUIDISERS
Fluidise powders with aeration pads and bottom sweep systems
Silo fluidisers inject dry, oil-free air into the material through aeration pads or bottom sweep nozzles placed on the cone surface, making the powder fluid. Material stuck to the cone wall is released and flows towards the outlet.
At OPTA Mühendislik we design fluidisation systems by calculating the number and placement of pads and the air demand for the silo geometry. Pulsed air is controlled from the PLC through solenoid valves. For deposits firmly stuck to the cone wall, we use fluidisers together with a pneumatic hammer.

Aeration pad vs bottom sweep
| Aeration pad | Bottom sweep (air sweep) | |
|---|---|---|
| Construction | Flexible-membrane pad mounted on the cone surface | Air nozzles directed into the cone |
| Effect | Surface fluidisation | Clearing build-up with strong pulsed air |
| Suitable material | Fine, dry, fluidisable powders | Powders prone to sticking |
| Air consumption | Low | Medium (pulsed) |

Aeration pad
An aeration pad is a fluidising element with a flexible membrane, bolted to the cone surface from outside. When air is supplied the membrane opens slightly and spreads the air along the cone wall; when the air is cut it closes and stops material entering the air line.
- External mounting, maintenance without entering the silo
- Flexible membrane that acts as a check valve
- Low air consumption
- Food-grade membrane option

Bottom sweep system
Bottom sweep nozzles are placed tangentially inside the cone and deliver short, powerful pulses of air in sequence. These pulses sweep build-up on the cone wall towards the outlet.
- Sequential pulsed operation
- Nozzles with check valves; material does not enter
- Requires dry, oil-free air
Equipment and standards
Standard
- Carbon steel or stainless body
- Geared motor / drive
- Maintenance and inspection covers
- Mounting flanges
Optional
- Air preparation unit
- Sequencer valve group
- Stainless nozzles
- Pneumatic hammer
- PLC control
Standards
- Machinery Directive 2006/42/EC
- ATEX 2014/34/EU
- Food-grade materials (option)
More in Silo equipment
Silo top filterJet-pulse filters that remove dust from the filling air.→
Silo activatorActivator that breaks bridges by vibration and provides mass flow.→All silo equipmentEquipment / Machines→Frequently asked questions
Does fluidisation work with every powder?
It is very effective with fine, dry, fluidisable powders; for moist and fibrous materials we recommend an activator.
What should the air source be?
Dry, oil-free compressed air is required; air is prepared with a dryer and filter.
Can it be added to an existing silo?
Yes. Pads or nozzles are mounted through holes drilled in the cone surface.
Let’s work together on silo fluidisers
Tell us about your raw material, capacity and site, and we will come back with a preliminary design and quotation.