Get a Quote

SILO TOP FILTER

Jet-pulse filters that remove dust from silo filling air

A silo top filter captures the dust in the conveying air entering the silo from a silo truck or pneumatic line and vents clean air to atmosphere. The captured dust is shaken off the filter elements by pulses of compressed air (jet-pulse) and falls back into the silo.

At OPTA Mühendislik we size silo top filters according to air flow and dust properties. We calculate filter area, element type (cartridge or bag), cleaning system and fan requirement, and select a filter that meets dust emission limits.

Jet-pulseautomatic cleaning
Cartridge / bagelements
Back to silodust return
Silo top filter
How does it work?

How does it work?

As dusty air passes from the outer surface of the filter elements to the inside, the dust stays on the element. At set intervals a short pulse of compressed air into the elements shakes the dust off and it falls into the silo.

  1. Conveying air enters the filter housing
  2. Dust is held on the element surface
  3. Clean air exits to atmosphere
  4. A jet pulse cleans the elements
Sintered polyethylene filter elements

Sintered polyethylene filter elements

In OPTA filters we use sintered polyethylene (PE) lamella filter elements instead of conventional fabric bags and cartridges. Made by sintering polyethylene powder under high temperature and pressure, these elements are rigid, porous and self-supporting, with a PTFE-coated surface.

Dust does not penetrate the element; it stays on the surface and is shaken off completely by the jet pulse. The element does not clog, and pressure drop stays constant for years.

No maintenance needed for 15 years.

We build our own-design filter housings with these elements and use them in silo top, receiver and process filters.

Features of sintered PE elements

01

Surface filtration

The PTFE-coated surface keeps dust outside; the element does not foul from within.

02

High efficiency

Even with very fine dust, emissions to atmosphere are very low.

03

Long life

Does not wear or tear; no maintenance needed for 15 years.

04

Rigid structure

No support cage needed; elements keep their shape.

05

Resistance to moisture and chemicals

Maintains performance with moist, sticky and chemical dusts.

06

Washable

If necessary they can be removed, washed with water and reused.

07

Compact filter

The lamella structure gives more filter area in the same volume.

08

Constant pressure drop

Fan and air consumption remain unchanged for a long time.

09

Food-grade

Material options suitable for food and pharmaceutical applications.

From the field

Silo top dust filter
Silo top dust filter
Filter and platform
Filter and platform
Silo top platform
Silo top platform

Equipment and standards

Standard

  • Carbon steel or stainless body
  • Geared motor / drive
  • Maintenance and inspection covers
  • Mounting flanges

Optional

  • Sintered PE lamella elements
  • Fan-assisted (suction) filter
  • Antistatic elements
  • Differential pressure gauge
  • ATEX explosion relief
  • Stainless body

Standards

  • Machinery Directive 2006/42/EC
  • ATEX 2014/34/EU
  • Food-grade materials (option)

More in Silo equipment

Silo activatorActivator that breaks bridges by vibration and provides mass flow.→Silo fluidisersFluidisation with aeration pads and bottom sweep.→All silo equipmentEquipment / Machines→

Frequently asked questions

How is the filter size chosen?

The required filter area is calculated from the air flow of the silo truck or pneumatic line and the fines content of the dust.

How often are filter elements replaced?

It depends on use and material; replacement time is determined by monitoring differential pressure.

The filter on my existing silo is undersized — can it be replaced?

Yes. We fit a larger filter with a flange suited to the silo roof.

Let’s work together on silo top filter

Tell us about your raw material, capacity and site, and we will come back with a preliminary design and quotation.