WEIGHED VACUUM CONVEYING
Weigh as you convey with a vacuum receiver: recipe preparation and consumption tracking
In a weighed vacuum conveying system, the vacuum receiver or the hopper beneath it stands on load cells. The weight is measured continuously while material is drawn into the receiver; suction stops when the target quantity is reached. Conveying and weighing are thus done in a single step.
At OPTA Mühendislik we use weighed vacuum systems to prepare multi-component recipes, drawing each component in turn from its own pick-up point into the same weigh hopper. Recipes and weighing records are managed through SCADA.

How is a recipe prepared?
- STEP 01
Recipe selection
The operator selects the recipe and number of batches in SCADA.
- STEP 02
Component pick-up
Each component is drawn in turn through its own suction valve.
- STEP 03
Coarse / fine suction
Near the target, suction is done in short bursts to prevent overshoot.
- STEP 04
Weighing record
The actual weight of each component is recorded.
- STEP 05
Discharge
The finished batch is discharged into the mixer or reactor.
From the field



Equipment and standards
Standard
- Load-cell vacuum receiver or hopper
- Suction valve per component
- Weighing indicator
- PLC / HMI recipe screen
Optional
- SCADA recipes and reports
- Barcode raw material verification
- Separate weighing for micro components
- Automatic sampling
Standards
- OIML R76-compliant weighing (option)
- ATEX 2014/34/EU
More in Vacuum conveying
Vacuum conveying systemsDust-free conveying with vacuum pumps and receivers.→
Vacuum receiverReceiver that picks up material by vacuum, filters it and discharges into a hopper.→
Mobile vacuum unitWheeled unit that picks up from octabins or big bags and fills big bags.→All vacuum conveyingPneumatic Conveying→Frequently asked questions
How accurate is weighing with vacuum?
Typically ±0.5–1% depending on hopper capacity and load cell; for small components we use separate micro weighing.
How many components can be weighed in the same hopper?
Usually 4–10 components, depending on weigh hopper capacity and cycle time.
Can you convert my existing vacuum system to weighing?
Yes, if the receiver or hopper can be mounted on load cells; we convert it with flexible connections and an indicator.
Let’s work together on weighed vacuum conveying
Tell us about your raw material, capacity and site, and we will come back with a preliminary design and quotation.